< Wood Testing - Janka Hardness....Evaluating wood properties - AWTA Product Testing
image description

Wood Testing - Janka Hardness....Evaluating wood properties

Janka Hardness - is a measure of the hardness of wood.

Do you need to establish the properties of Wood-based Fibre & Particle Panel flooring & materials?

Damage caused by stiletto type heels or even fine legged furniture, can be a significant concern for consumers of high cost products such as flooring in both residential and commercial premises.
Janka Hardness - ASTM D1037, Clause 17

The Janka Hardness Test is a measure of the hardness of wood, developed as a variation of the Brinell hardness test, to determine the suitability of various timbers for flooring. The test measures the force required to push a steel ball with a diameter of 11.28 millimetres (100 mm2 area at it widest) into the wood to a depth of half the ball's diameter (5.64 mm).

 
Testing is conducted using a constant rate of extension (CRE) testing unit. The compressive load required to force the ball to 5.64mm into the specimen is recorded and expressed as the hardness value. A number of individual tests are conducted and results averaged to determine the Janka Hardness.

LINK to Fact Sheet: Janka Hardness Test 

CONTACT US:

Please do not hesitate to contact us in regards to Janka Hardness testing or for further information/pricing requirements.

Phone: (03) 9371 2400 or Email: [email protected]